A collection of published articles from members of the Department of Mechanical Engineering at Kennesaw State University.
Visit the full list of Faculty Publications to view the work from other departments on campus.
This collection was started in the Fall 2015 semester, after the consolidation between Kennesaw State University and Southern Polytechnic State University was final (July 2015).
Submissions from 2023
Hybrid Metal-Organic Frameworks/Carbon Fibers Reinforcements for Additively Manufactured Composites, Marwan Al-Haik, Suma Ayyagari, Yixin Ren, Andrew Abbott, Bing Qian Zheng, and Hilmar Koerner
Floating Offshore Wind Turbines: Current Status and Future Prospects, Mohammad Barooni, Turaj Ashuri, Deniz Velioglu Sogut, Stephen Wood, and Shiva Ghaderpour Taleghani
Synergistic composites energy harvester beams based on hybrid ZnO/PZT piezoelectric nanomaterials, Simon Furnes, Marwan Al-Haik, and Michael Philen
Design and evaluation of a new composite spine support, Simin Nasseri, Mohammad Jonaidi, Salim Kortobi, Timothy Plowman, and George Williams
Design, Finite Element Analysis and Fabrication of Composite Orthoses for Bunions; A Comprehensive Study., Simin Nasseri, Mohammad Jonaidi, Salim Kortobi, George Williams, and Logan Willis
New energy partitioning method in essential work of fracture (EWF) concept for 3-D printed pristine/recycled HDPE blends, Sukjoon Na, Ahmet Oruc, Claire Fulks, Travis Adams, Dal Hyung Kim, Sanghoon Lee, and Sungmin Youn
Thermal Transport Study in a Strained Carbon Nanotube and Graphene Junction Using Phonon Wavepacket Analysis, Jungkyu Park
Controlled thermal pre-treatment of ZMG232G10® for corrosion mitigation under simulated SOFC interconnect exposure conditions, M. Reisert, A. N. Aphale, M. R. Anisur, S. Belko, M. Yaginuma, T. Shiomi, N. Dale, A. M. Hussain, P. K. Dubey, and P. Singh
Impact of 3D-printed laboratory equipment in vibrations and controls courses on student engineering identity, motivation, and mindset, Tris Utschig, Ayse Tekes, and Maureen Linden
Submissions from 2022
Developing novel heterogenous microstructures to balance between strength and ductility without restoration processes in commercial Al alloys, Khaled F. Adam and David P. Field
Kidney epithelial cells are active mechano-biological fluid pumps, Mohammad Ikbal Choudhury, Yizeng Li, Panagiotis Mistriotis, and Ana Carina N. Vasconcelos
Laying the Groundwork for STEAM: Scaling and Supporting 3D Design and Printing in Higher Education, Jason R. Harron, Randy Emert, Dominic M. Thomas, and Jeff Campana
Rapid design and implementation of a UVC decontamination room, Andrew Hummel, Awatef Ergai, Lee Anna Spiva, and Austin Crawford
Reinforcing student learning by MATLAB simscape GUI program for introductory level mechanical vibrations and control theory courses, Paul Pena, Tristan Utschig, and Ayse Tekes
Significance of aortoseptal angle anomalies to left ventricular hemodynamics and subaortic stenosis: A numerical study, Jason A. Shar, Sundeep G. Keswani, K. Jane Grande-Allen, and Philippe Sucosky
Effective Force Generation During Mammalian Cell Migration Under Different Molecular and Physical Mechanisms, Lingxing Yao and Yizeng Li
Investigation of Radionuclide Migration at Sites Adjacent to the 30-km Exclusion Zone of the Chernobyl Nuclear Power Plant, V. A. Zheltonozhskyi, M. V. Zheltonozhskaya, D. E. Myznikov, and E. B. Farfán
Submissions from 2021
Trajectory control of planar closed chain fully compliant mechanism, Martin Garcia, Kevin McFall, and Ayse Tekes
Accurate simulation of the four modes of post-die extrudate shape distortion, M. Gupta
Hydrogen, Bicarbonate, and Their Associated Exchangers in Cell Volume Regulation, Yizeng Li, Xiaohan Zhou, and Sean X. Sun
Navigation of a Freely Walking Fruit Fly in Infinite Space Using a Transparent Omnidirectional Locomotion Compensator (TOLC), Pikam Pun, Jacobs Brown, Tyler Cobb, Robert J. Wessells, and Dal Hyung Kim
Corrosion of chromia-forming and alumina-forming ferritic stainless steels under dual atmosphere exposure conditions, M. Reisert, M. R. Anisur, L. Lee, A. N. Aphale, J. Hong, M. Yaginuma, T. Shiomi, N. Dale, A. M. Hussain, and P. Singh
Computational Assessment of Valvular Dysfunction in Discrete Subaortic Stenosis: A Parametric Study, Jason A. Shar, Sundeep G. Keswani, K Jane Grande-Allen, and Philippe Sucosky
3D-printed torsional mechanism demonstrating fundamentals of free vibrations, Ayse Tekes
Demonstration of vibration control using a compliant parallel arm mechanism, Ayse Tekes, Tris Utschig, and Tyler Johns
Submissions from 2020
Recovery of energy losses using an online data-driven optimization technique, Turaj Ashuri, Yaoyu Li, and Seyed Ehsan Hosseini
Dynamic organelle distribution initiates actin-based spindle migration in mouse oocytes, Xing Duan, Yizeng Li, Kexi Yi, Fengli Guo, Hai Yang Wang, Pei Hsun Wu, Jing Yang, Devin B. Mair, Edwin Angelo Morales, Petr Kalab, Denis Wirtz, Sean X. Sun, and Rong Li
The importance of water and hydraulic pressure in cell dynamics, Yizeng Li, Konstantinos Konstantopoulos, Runchen Zhao, Yoichiro Mori, and Sean X. Sun
Phonon scattering and thermal conductivity of actinide oxides with defects, Katherine Mitchell, Jungkyu Park, Alex Resnick, Hunter Horner, and Eduardo B. Farfan
Submissions from 2019
The Influence of Temperature on Dispersion of Particles on Liquid Surfaces, Sathish Kumar Gurupatham, Valmiki Sooklal, A. Hensen, and M. Conner
Assessing non-uniform stiffening of the achilles tendon noninvasively using surface wave, Muhammad Salman and Karim G. Sabra
Design, Modelling and Experimentation of a Novel Compliant Translational Dwell mechanism, Ayse Tekes, Hongkuan Lin, and Kevin McFall
Submissions from 2015
Use of Linear Viscoelastic Theory to Predict Resilient Behavior of Unbound Granular Materials, Sung-Hee Kim, Kevin McFall, JayHyun Kwon, and Jidong Yang
Optimisation of Process Parameters and Residual Stress Analysis of Transmission Laser Microjoining of Glass and Silicon, Mohammed S. Mayeed and Golam M. Newaz
Submissions from 2014
Modeling Replenishment of Ultrathin Liquid Perfluoropolyether Z Films on Solid Surfaces Using Monte Carlo Simulation, M.S. Mayeed and T. Kato
Submissions from 2012
Characterization of Balsa Wood Mechanical Properties Required for Continuum Damage Mechanics Analysis, G. Newaz, M. Mayeed, and A. Rasul
Submissions from 2011
Finite Element Thermal/Mechanical Analysis for Microscale Laser Joining of Ultrathin Coatings of Titanium on Glass/Polyimide System, M. S. Mayeed, N. J. Lubna, G. W. Auner, and R. Patua